Ember Saturator
Saturator with tube, tape, transistor and fuzz styles, tone tilt, auto gain and oversampling, which can split the signal into up to four bands with their own style and drive.

Ember Saturator is an effect slot plugin for adding harmonics and grit. Use it on single tracks, buses or the master. It runs as one band or as up to four Linkwitz-Riley bands, each with its own style and drive.
Controls
| Control | What it does |
|---|---|
| Drive | Amount of saturation applied to the band. |
| Style | Saturation curve: tube (asymmetric, even harmonics), tape (odd harmonics), transistor or fuzz, plus the other entries of the style menu. |
| Bands | Number of bands, up to four. |
| Crossover slope | Slope of the band splits: 12, 24 or 48 dB per octave. |
| Mix | Blend of the band's processed signal. |
| Dry / wet | Blend of the whole plugin with the unprocessed signal. |
| Tone tilt | Tilts the balance between low and high frequencies. |
| Low cut | High-pass filter on the processed signal. |
| High cut | Low-pass filter on the processed signal. |
| Auto gain | Compensates the level change caused by the drive. |
| Oversampling | 2x, 4x or 8x oversampling to reduce aliasing. |
| Output | Output level. |
Tips
- Start with one band and the tube style, then switch to more bands when the low end distorts more than you want.
- Keep Auto gain on while setting Drive, so you compare processed and dry at a similar level.