Quell Denoiser
One-knob noise suppressor with six bands, each with a downward expander that follows the Amount control. Listen plays back what is being removed.

Quell Denoiser is a native LYNX SHARE effect for a mixer insert. It reduces steady broadband noise such as hiss with a single Amount control. Internally the signal is split into six phase-coherent bands, each with a soft-knee downward expander.
Controls
| Control | What it does |
|---|---|
| Amount | Fader from 0 to 100. Sets the threshold, depth and trim of every band together. |
| Listen | Plays what is taken away instead of the result. |
| Output | Output level in dB. |
| Meter | Level meter on the left with a held reduction read-out below it. |
| Matched | Switches from the six-band expander to the matched engine: cuts on seven octave bands, with no latency. Off by default. |
| Classic / Measured | Matched engine only. Measured lets each band follow the noise floor it measures over about a second, so steady noise is taken down further. It costs some CPU. The switch is shown only for an instance from a project or preset saved before 0.1.27, which loads on Classic and sounds as before. Once you switch to Measured it is hidden. New instances use Measured. |
Tips
- Use Listen while raising Amount: if you start to hear the wanted signal in it, back off.
- The expanders open fast and close more slowly, and both channels are linked.