LYNX SHARE
All wiki pages

Voice Shift

Shifts pitch and formant of a voice or instrument, with a link between them, a drive stage, a mix and optional MIDI control.

EffectPitch and voice
Voice Shift

Voice Shift is a pitch and formant shifter for one voice or one monophonic line. It detects pitches between 70 Hz and 1000 Hz. It reports its latency for delay compensation and delays the dry signal to match.

Controls

ControlWhat it does
PitchPitch shift, -12 to +12 semitones.
FormantFormant shift, -12 to +12 semitones.
LinkMakes the formants follow the pitch. Formant then works as an offset.
ModeTranspose shifts by the Pitch amount. Quantize also moves the voice to the nearest semitone at once. Robot sings one fixed note, C4 at Pitch 0, which Pitch moves.
DriveA tube-style saturation stage on the shifted voice, 0 to 10.
MixBalance between the dry and the shifted signal.
MIDI channelOff, or a Channel Rack channel whose held notes set the pitch. Transpose and Quantize shift by the distance of the highest held note from C4, and Robot sings that note.
Classic / MeasuredMeasured makes the sounds the detector does not find voiced, such as s and t sounds, follow the formant shift (with Link on, the pitch and the formant). The switch is shown only for an instance from a project or preset saved before 0.1.27, which loads on Classic and sounds as before. Once you switch to Measured it is hidden. New instances use Measured.

Tips

  • With Link on, turning Pitch moves the formants with it, like a change of playback speed.