LYNX SHARE
All wiki pages

Spiral Echo

Frequency-shifting echo. Every repeat moves by the shift amount, in opposite directions on the left and right in stereo, with filters in the feedback loop.

EffectDelay
Spiral Echo

Spiral Echo is a native LYNX SHARE delay for a mixer insert. Each repeat is shifted in frequency a little more than the last, which makes the echoes climb or fall instead of simply repeating. In stereo the right side hears each repeat with the opposite shift.

Controls

ControlWhat it does
MixDry and wet balance.
DelayDelay time, from 0.01 ms to 1000 ms.
ShiftFrequency shift added on every repeat, up to plus or minus 1 kHz.
FeedbackHow much of the output returns to the input.
Low cutLow cut in the feedback loop.
High cutHigh cut in the feedback loop.
Delay syncFree, or one of 23 tempo divisions.
OutputOutput mode (Stereo in the picture).
Classic / MeasuredMeasured uses the measured feedback loop: its filters, an added all-pass, the limiter and the glide when the delay time changes. It uses a little less CPU. New instances start on Measured. Projects and presets saved before 0.1.27 load on Classic and sound as before.

Tips

  • The feedback loop gain is 1.5 times the knob, and it is soft-limited, so high settings do not run away.