LYNX SHARE
All wiki pages

Fruity Delay Bank

A bank of up to eight delay lines with per-line input, filter, feedback, grain and output sections, plus global dry, wet, input and feedback levels.

EffectDelayOpens FL's Fruity Delay Bank settings from .flp
Fruity Delay Bank

Fruity Delay Bank has eight delay banks. Each bank has an input stage, a filter, a delay line with a feedback path and its own feedback filter, a stepped gain pattern and an output stage, and can send into the next bank. It loads the settings of the FL Studio plugin from an imported .flp project.

Controls

ControlWhat it does
Bank switches and tabs 1 to 8The switches on top turn each bank on. The tabs choose the bank shown.
Dry / Wet / In / FBGlobal levels: the dry signal, the output of the banks, the input into the banks and the feedback of all banks.
OversampleOff, 2x or 4x.
In: Pan, VolPan and level of the signal entering the bank.
FilterType (off, low pass, band pass, notch, high pass, low shelf, peaking or high shelf), 1 to 3 sections, Gain, Cut and Res. Post places it after the delay instead of before.
Feedback: modeOff for no delay, Norm, Inv for swapped outputs, or P.pong for ping-pong feedback.
Feedback: Time and TDelay time. T syncs it to the tempo.
Feedback: OfsTime offset between the left and right delay.
Feedback: Sep, Pan, VolStereo matrix, pan and level of the feedback path.
FB filterA second filter with the same types, inside the feedback path.
Grain: Div, ShA stepped gain pattern on the delay. Div is the number of steps per delay time (0 is off) and Sh the shape of the steps.
Out: NextAmount of this bank sent into the next bank. Bank 8 has no Next.
Out: Pan, VolPan and level of the bank in the output.

Tips

  • Select a bank with the numbered tabs to edit it. The switches above the tabs show which banks are on.